The Essentials of Resources – Breaking Down the Basics

4 Stages To Do Hardwood Floor Refinishing Correctly

Homeowners need to know that together with planning and patience and skill, they ought to have specialized equipment as well when considering hardwood floor refinishing. This project is something that requires research, knowledge and time out of all other home improvement projects that homeowners can have. You will go through different steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors.

In any of the said stages or steps, even a slight touch of error is enough to cause problems that can last for a long time. Yes, you can refinish the entire hardwood flooring alone but, it is wise that you get some help at some parts. It will take around 1 to 3 weeks to carry out refinishing for this kind of flooring.

Step 1. Checking the hardwood floor – it is your job to determine whether or not the hardwood floor planks is a laborious process. You need to evaluate if the floor suffered from water, pet urine or spills. You may pull up one threshold of the door in order to see if the boards are so thin to be sanded. In addition to that, it is vital that you find out if the last sealant was varnish, wax or polyurethane. You need to examine your hardwood flooring in order to see if they’ve got deep gouges or dramatic wear patters.
The 10 Best Resources For Resources

Step 2. Preparing the flooring – before you do hardwood floor refinishing, you must prepare the flooring first. You’re all set to start with the preparation in case that most hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant.
If You Think You Understand Installations, Then Read This

First thing that you’ve got to do is clean the whole floor area. You also have to file any holes from nails, staples or scrapes. You need to pull up the thresholds as well as the baseboards too. You need to do all the floors to keep it consistent even if one of the floors not looks good.

Step 3. Sanding – probably, this is the most daunting and demanding step that you will ever do. You will be renting drum sander equipment, which is quite loud to use and, you need to roll it onto the entire hardwood flooring 3x to be able to peel off the top layer of the finish.

Step 4. Staining and sealing – just before you start with this step, you must ensure that every bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. Once you’re done staining the floor, you now have to seal it with thin layer of sealant to be sure that the stain is dried completely prior to application.

Categories: Software